SKU / Product Info	Quantity
SD10112MB Screw Size: #10 Length (in.): 1-1/2 Package Quantity: 3000
SD10112R100 Screw Size: #10 Length (in.): 1-1/2 Package Quantity: 100
SD10112R500 Screw Size: #10 Length (in.): 1-1/2 Package Quantity: 500
SD10212MB Screw Size: #10 Length (in.): 2-1/2 Package Quantity: 2000
SD10212R100-R Screw Size: #10 Length (in.): 2-1/2 Package Quantity: 100
SD10212R500 Screw Size: #10 Length (in.): 2-1/2 Package Quantity: 500
SD9112MB Screw Size: #9 Length (in.): 1-1/2 Package Quantity: 3000
SD9112R100 Screw Size: #9 Length (in.): 1-1/2 Package Quantity: 100
SD9112R500 Screw Size: #9 Length (in.): 1-1/2 Package Quantity: 500
SD9212MB Screw Size: #9 Length (in.): 2-1/2 Package Quantity: 2000
SD9212R100-R Screw Size: #9 Length (in.): 2-1/2 Package Quantity: 100
SD9212R500 Screw Size: #9 Length (in.): 2-1/2 Package Quantity: 500

Quick Overview

Specifically designed to replace nails in certain Simpson Strong-Tie connectors and is the only screw approved for that application. The #9 and #10 SD screws replace 10d and 16d nails, respectively.
The single-fastener load capacity of the #9 SD screw exceeds the capacity of a 10d common nail, while the single-fastener load capacity of the #10 SD screw exceeds that of the 16d common nail.
Tested and approved for use in many of our most popular connectors for both interior and exterior applications.
Ideal for use in connector applications where more control is desired or using a hammer is inconvenient.
1/4" hex head with 0.37"-dia. integrated washer is stamped with the Simpson Strong-Tie "?" sign and the fastener size for easy identification after installation.
Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors.
Optimized heat treating for ductility and strength.
Hex driver included.

Interested in this item or want more information?
Call Mon. - Fri. 7:30 AM - 5:00 PM / Sat. 8:00 PM - 12:00 PM
Phone: (888) 489-9111
Email: info@janell.com

Can't find what you want? Give us a call and we can help you find it.

Details

Designed to replace nails in certain products, the load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie® products. In certain applications screws are easier and more convenient to install than nails, and the single-fastener load values achieved by the SD9 and SD10 exceed those of typical 10d common or 16d common nails, respectively. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions. The SD structural-connector screw features an optimized shank which is specifically designed to be compatible with the fastener holes in Simpson Strong-Tie connectors. The hex head virtually eliminates cam-out and helps avoid stripping of the head during installation. The sharp point of the screw enables fast starts, and the patented serrated threads reduce torque for improved drivability.

Strong-Drive Structural Fasten

Additional Information

Manufacturer: Simpson Strong-Tie